Isolation Transformer Installation Guide

Isolation Transformer Installation Guide Mount or place the transformer in a dry, indoor location Locate and open the package with the speakON connecter Remove 1.0 in. (25 mm) of the cable's outer jacket Remove 0.5 in. (12 mm) of insulation from each wire Place the black plastic piece inside the blue sleeve Place the blue sleeve over the wire Loosen the screws on the connector a few turns Place the positive wire (white) into the 1+ slot and the negative wire (black) into the 1- slot Tighten both screws Pull on the wire to ensure the connection is secure Align the tabs on the black piece with the recess' on the connector Push the blue sleeve up and screw into the connecter until tight Insert the connector into the transformer and turn clockwise until you hear a click Repeat this process for the speaker cable and connect it to the transformer For more information please visit: www.clarksynthesis.com/isolation-transformer/