K1 MAX light strip

Notes: 1) When cutting the light strip, pay attention to the cutting position. Since the light strip is a complete light strip, users need to cut and assemble it by themselves. The cutting position must be at the exposed copper position 2) The positive pole must be connected to the positive pole and the negative pole must be connected to the negative pole, so users need to confirm whether the positive and negative poles of the wiring are correct before officially powering on. 3) Users do not need to print the printout, but can directly tear off the adhesive paper on the light strip and stick the light strip on the side of the machine. 4) The length of the light strip is required to meet the cutting requirements of three side light strips and one front light strip. Three 365mm long light strips and one 320mm long light strip can be cut.