K3NG Rotator Controller Start Up Issue

Adam noticed that his G-5500 was moving Clock-Wise every time the system was powering on. If the rotor were installed up on the tower, this would not have been so obvious, except that the rotor is still here in the shack. Aside from the internal 300mS delay with the Teensy 3.2 start-up USB initialization delay, it appears the K3NG code is getting caught up doing things before the MCU pins are initialized and set. The Teensy 3.x and LC USB delay is discussed here for those interested: https://forum.pjrc.com/threads/36606-startup-time-(400ms) Making this simple edit to the k3ng_rotator_controller.ino file will help minimize unnecessary mechanical stresses on your antenna array. https://vk4ghz.com ------------------------------------------------------------------------------- Banggood referral: Get USD$20 voucher with your first order with Banggood. https://banggood.app.link/fR1lWkK86cb Get $5 off your first order with PCB Way.: https://www.pcbway.com/setinvite.aspx?inviteid=290409 Get FREE music and sound effects for your own Youtube videos using this referral link; https://www.epidemicsound.com/referral/t6yvn0/ When You GET OFF Facebook, These 10 Things Will Happen: https://www.lifehack.org/articles/communication/when-you-stop-checking-facebook-constantly-these-10-things-will-happen.html Leave the juvenile rubbish on Foolbook, and join the adults on GroupsIO https://groups.io/groups ------------------------------------------------------------------------------- Did I help you? Show your appreciation and help support this channel by donating enough for a decent cup of coffee! https://www.paypal.com/donate?token=Z-v_Y-AFI4nUxRQEDbcUUvDp47fZvy2rI5-Z7-yDg2ZerQwlDraMmmvCDAdE9Ti94RHxmfQblFaEKLvt