LabVIEW Tutorial #9: Example III Screen Systems (Part 1/2)

Design a feed forward screening system with three screens, so that the inlet flow can be controlled with a knob. The flow rate, solid content, consistency of both accepted lines and rejected lines should be shown on the Front Panel. Besides, the inlet flow rate and consistency should be displayed. Assume that, as each kilogram of solids passes through the rejection line, 1*10 exp-6 [kg] of debris stick to the screen and sediment there. Use an indicator to show this sedimentation of debris (Using something like this helps us to know when to clean or replace a screen) Manual: http://www.4shared.com/office/BibZV-yRba/2013-04-3_Introduction_to_Appl.html Examples: http://www.4shared.com/rar/Pwm9DgaFba/Examples.html