In this video, I’ll show you how to program, set up, and adjust the settings for the Legrand (Pass & Seymour) RRW600U and/or RRW600UTC motion sensor light switch.
The good news is, there’s only one button you need to worry about. The bad news is, if you don’t have the instructions and understand how long you have to push that button and hold it down, you’ll be totally lost. So, hopefully, I’ll be able to guide you through it in this video.
Instruction Manual: http://pdf.lowes.com/productdocuments/4de87808-d1bf-4a07-8883-60c4c4469487/09045032.pdf
Amazon Link: https://amzn.to/3kDtjZZ
0:00 - Intro
0:28 - Enter programming for time delay settings
0:56 - Adjusting the time delay settings (30 seconds, 5 minutes, 10 minutes, 15 minutes or 30 minutes)
1:51 - Exit programming for time delay settings
2:07 - The difference between occupancy mode and vacancy mode
2:33 - Enter programming for occupancy and vacancy mode
2:52 - Switching between occupancy and vacancy mode
3:08 - Exit programming for occupancy and vacancy mode
3:30 - Enable or Disable the Status LED Light
