Make ESC 400A

I just bought a Flysky I6 Transmitter Control. It costs about $ 45. Very cheap, I want to build a powerful control car .... hummhh. i already have 775 motor. i need a speed control circuit for it. lest go. This speed control circuit uses PIC 12F675 microcontroller. It receives throttle signal from RX. Then generate a PWM signal to activate the totem driver. The totem pole driver will control the mosfet "on" - "off" and provide power to the motor. I use 4 mosfet CMP1405. It has a current of 140A 5.5 miliohm. I think, with 4 mosfet it can load up to 400A. However, in fact, I only use about 30A. So mosfet is very cool. You can use IRF3205 or any mosfet you have. All my projects are free, I design them on EAGLE 6.0. I uploaded it to Google drive. You need to use a web browser to download the file and open the file with winrar software (extract) on the PC. Open schematic file (.SCH) and PCB file (.BRD) with EAGLE software. Hope you enjoy my videos and projects. Like, share and don't forget to subscribe to my channel. one more thing, thanks to everyone, my channel has reached 65K subscribers. Facebook group : http://bit.ly/CreativeElectronic Source : http://vmdsoft.designsoft.com.au/ahome/rc/PIC-ESC/ Diagram here : File 62 in http://bit.ly/AllLink or https://drive.google.com/file/d/1ccNeeBCZlpb4AzBaSu0Q606MOjy_DUWw/view?usp=sharing You need web browser to download file (I upload it to google drive), open the file with winrar on PC. I use EAGLE 6.6 to design the PCB. #Inverter #12Vto220V #ESC