Mastercam in this video we show u about Solids Tab
#Constant Radius Fillet
Constant Radius Fillet uses edge blending to produce a rounded edge, introducing new faces that are tangent to the edges' adjacent faces. You determine the extent of the fillet by inputting a constant radius value.
#Face to Face Fillet
Face to Face Fillet uses two faces or two sets of faces that are blended together to create a fillet. Mastercam uses various ways of creating the fillets depending on the operation type that is selected.
#Variable Radius Fillet
Variable Radius Fillet uses edge blending to produce a rounded edge, introducing new faces that are tangent to the edges' adjacent faces. You determine the extent of the fillet by inputting various radius values along the edge. You can also specify radius positions.
#One Distance Chamfer
One Distance Chamfer uses edge blending to create a symmetrical beveled edge with the same chamfer distance for both edge faces. You determine the size of the chamfer by entering the distance value.
#Two Distance Chamfer
Two Distance Chamfer uses edge blending to create a level based on two distances and a reference face. Mastercam uses Distance 1 to calculate the extent of the chamfer between the reference face and the selected edge. Distance 2 determines the extent of the chamfer between the complementary face and the selected edge.
#Distance and Angle Chamfer
Distance and Angle Chamfer uses edge blending to create a level based on a distance, an angle, and a reference face.Mastercam uses the distance and the angle to calculate the extent of the chamfer on the selected edge, relative to the reference face.
Be Connected we will upload on Mastercam in Hindi
