Mastercam Surface Area Rough and Rest Machining Tool Paths

Hello Everyone, Subscribe for upcoming series to learn Mastercam software. These videos are available in both Hindi and English for your convenience. Mastercam Training video made to those working in CNC ,CAD /CAM area. Area Roughing Toolpaths Use this toolpath to machine standing bosses and cores, cavities and pockets, or material that other toolpaths left behind. OpenRest Material Strategy To enable the Rest Material strategy, the Rest Material checkbox on the Stock page must be activated. Use this strategy to calculate the cutting passes on only the stock left over from one or more previous roughing operations, instead of the entire drive surfaces. For each area of remaining stock, Mastercam calculates cuts using the Stay Inside machining strategy. Most Finishing 3D HST use an option similar to the Rest Material checkbox, but is instead named Trim to Stock, and these settings calculate a stock model based on the dimensions of a roughing tool and only apply the toolpath to those areas. Unlike Area Roughing, they do not create multiple cuts in each area. Use them for applications where you want a different cutting strategy than Area Roughing passes, and the remaining stock is light enough to machined with a single cut. ClosedFrom Outside Strategy ClosedStay Inside Strategy Contact us for personal Training and Mastercam Software requirement (For both Industrial and Educational) . [email protected] http://pragathicamtech.com/ LIKE||SHARE|| SUBSCRIBE