MD2 drone setup, check and flight

How to setup the MD2 drone, mount propeller, check radio, and fly safely. This film starts with an assembled MD2 drone. https://shop.makekit.no/products/md2 Chapters: 00:00 Motor placement 00:40 Radio receiver and buzzer/battery connection 01:50 Connecting ESCs (servo cable) 03:00 Power on flight controller 03:50 Battery voltage measurement 05:10 Motor layout setup, show motor layout 06:10 Connect motors to ESCs and correct connection of ESC 09:00 Radio control stick directions 10:10 Radio binding 10:30 Radio receiver testing and trimming 15:30 Switches, CH5 and D/R 16:45 Motors CW vs CCW 17:14 The two kinds of propellers 18:40 ACC calibration 19:25 Self level settings 20:45 Arming and testing motors, correcting 23:30 ESC calibration 26:10 About motor speed and drone stabilisation 27:00 How to use the accelerometer and gyro bubble 28:00 Mounting propellers correctly 30:20 Securing cables 31:10 Battery strap 32:16 Battery usage - prevent drain 34:12 Battery discharge curve 34:54 Flight test - how to fly