Mini and Mini Pro Base Unit Install

How to assemble your new Mini Or Mini Pro 1.2 Base Unit In this video we are using the Mini Pro Here we have the Monorail, the Carriage, the pulley system and the front platform Make sure your machine is on a safe surface We also recommend you have a second person to help. Let’s start by sliding the carriage in The wheels should slide effortlessly into the side rails The front of the machine is where the Logo is And the back where the numbers are. Make sure to slide the carriage with the small hinging platform first Pointing at the logo. So that the super fast spring change mechanism aligns with the spring hooks Located in the middle of the machine. For safety, make sure to engage at least the red spring so that the carriage Won’t move during the rest of the installation. Let’s install the pulley system next. For this you need an Allen key that is included with your machine. You need to remove the plastic cover first, If you don’t have a back platform, you can re-install the cover. Align the stoppers with the rails, then add the screws by hand. Then use the Allen key to tighten Once you’re done with the screws, re-install the cover. Next is the front platform There are two holes at the front end of the monorail And 2 screws on the platform Let’s have align them and thighten by hand first Then, for extra security we can tighten even more Using the Allen key. And just like that.. y Your platform is now installed Let’s complete the Pulley system install and add the accessories included First bring the carriage closer to the back Clip the carabiner clippers to the carriage Now let’s clip the extensions and handles And you’re done!