In this video, we will be showing you how you can set up a NUT server on your Raspberry Pi.
Tutorial: https://pimylifeup.com/raspberry-pi-nut-server/
NUT stands for Network UPS tools and is a suite of tools that allows you to interact with a connected UPS. By setting up a NUT server, multiple devices will be able to poll and check the current status of the UPS.
This is useful on a lot of cases. For example, if you have multiple computers connected to a single UPS, you will likely want each of them to be able to check what's happening with the UPS and shut down safely if needed.
This guide will show you how to install the NUT software and configure it to provide the status from any connected UPS. A single Raspberry Pi can even monitor multiple UPS's thanks to NUT.
While completing this tutorial, I used the following pieces of equipment. If you use one of these links, we may earn an affiliate commission.
Raspberry Pi: https://amzn.to/3WUT8Ij
Micro SD Card: https://amzn.to/3US0ZUz
UPS: https://amzn.to/4jaSrU0
