Nitro Engine, Clutch & Fuel System Race Prep Tutorial

In this tutorial, we will tear down a nitro engine, clutch and fuel system to prepare it for a trophy race. Thank you for watching! Please consider hitting the Thumbs Up and Subscribing to Dirt Concepts for more R/C content if you enjoyed this video. Products Featured in Tutorial: Engine: PTK-2690 ProTek RC RM.1 Nitro Engine PTK-2630 ProTek RC P3 Gold Glow Plug PTK-2560 ProTek RC Dust Cap Set PTK-2504 ProTek RC 7x19x6mm Samurai RM.1 Front Bearing PTK-2505 ProTek RC 14x25.4x6mm Samurai RM.1 Ceramic Rear Bearing GMK0104 GMK Supply "Carb-O's" - Silicone Throttle Return Bands Clutch: PTK-7551 ProTek RC 4 Shoe Clutch PTK-7558 ProTek RC Clutch Bell PTK-7562 ProTek RC 0.95mm Clutch Springs PTK-7150 ProTek RC 1/8 Scale Flywheel Nut, Collet & Shim Kit Exhaust: PTK-2528 ProTek RC Exhaust Gasket PTK-2135 ProTek RC 2135 Pipe PTK-7100 ProTek RC 3.5" 1/8 Exhaust Manifold Spring (2) (Long) Fuel System: FPR2111 Flash Point Premium Fuel Line (4Ft) Air Filter: PTK-7725 ProTek RC "DustBuster 2" TLR Style Pre-Oiled Air Filter Foam (12) Oils, Greases & Sealants: Permatex Ultra Black RTV Silicone Maximum Oil Resistance Gasket Maker Drake After Run Oil Tools: PTK-2023 ProTek RC Flywheel Removal Tool PTK-8480 ProTek RC Cleaning Brush (168mm) HUD107051 Hudy Ultimate Engine Tool Kit (.21 Engine w/14mm Bearing) Chapters: 00:00 Intro 01:07 Engine Removal 03:34 Remove & Inspect Clutch 05:11 Inspect, Clean & Disassemble Engine 13:25 Engine Bearing Removal 15:24 Clean Engine & Components 23:11 Inspect & Replace Engine Bearings 24:46 Lubricate & Assemble Engine 28:54 Carburetor Tips 30:21 Engine Final Assembly 32:07 Assemble Clutch 34:49 Clutch Shimming 35:45 Air Filters 39:21 Tuned Pipes 40:28 Fuel Tanks & Fuel Line 45:16 Outro