Nuflo Cameron RTJ Turbine flow meter

NUFLO LT standard piping liquid turbine flowmeters indicate flow rate and measure total throughput of a liquid line. As liquid flows through the meter and over the rotor, the rotor turns at a speed that is directly proportional to the flow rate. A magnetic pickup senses the rotor blades as they pass and generates an electrical (sine wave) signal. These electrical pulses are then transmitted to the flow measurement readout equipment. End connections Cameron offers turbine flow meters in a variety of end connections and accuracy levels. Typical applications are: •Threaded •Grooved •Flanged •EZ-IN •WECO 1502 Flanged End Connection Turbine flow meters with flanged end connections are available in both raised-face (RF) models and ring-type joint (RTJ) models. Flanged materials can be carbon steel or stainless steel. All flanged NUFLO liquid turbine flowmeters are equipped with slip-on flanges, which are then welded to the outside of the meter rather than being welded to the end of the meter body. Thus, the flange never comes into contact with the fluid being measured. The flanges are designed to mate with ANSI B16.5 flanges. Grooved End Connection Flowmeters with grooved end connections are available in 7/8" through 8" sizes. contact [email protected]