IMPORTANT NOTE: Check the DOMEBAUDRATE in your sketch, it may be set to 2400 which won't work with this setup, simply change it to 9600 and re-upload the sketch to fix this.
Here's part two of "How to build a Padawan 360 system". In this video, I show you how to connect your arduino to a Sabertooth 32 and Syren 10 speed controller for your motor and dome control.
Link to Part 1: https://youtu.be/oZw0zzCgoh8
Link to Part 3: https://youtu.be/T5u72fse8NE
Link to Sparkfun mp3/drivesort tutorial: https://youtu.be/UsMI2gW7Q40
Thanks to Dan Kraus for writing the code and allowing me to make this video.
Dan's Github: https://github.com/dankraus/padawan360
Thanks also to the UKR2 builders club, without whom I would probably be much richer ;-)
Link to full Padawan presentation (Thanks to Michael Baddeley): https://youtu.be/L8b8iva7eP8
