PCB Design in KiCAD | Zero To Maker Workshop

🔗 *The full Workshop* : _https://core-electronics.com.au/courses/zero-to-maker-workshop/_ In this video of the Zero to Maker Workshop, we will go through the 3 steps of designing a PCB in KiCAD. First, we will lay out our board schematic, as well as create some custom component schematics, then we will assign footprints (also making our own custom footprints). Then we will lay it all out and go through the steps of getting your board sent to a fab house. 🔧🔨🧰 Hardware featured in this guide: *Protoboards:* _https://core-electronics.com.au/prototyping.html#category_60_ *Breadboards:* _https://core-electronics.com.au/prototyping.html#category_61_ *The Pico* _https://core-electronics.com.au/catalog/product/view/sku/CE08702_ 💡❓ If you have any questions about this content or want to share a project you're working on head over to our *maker forum:* _http://coreelec.io/forum_ 0:00 Intro 0:31 Process Overview 1:45 Creating a Schematic 3:20 Creating a Custom Symbol 4:28 Adding Resistors 5:14 Net Labels, Test Points and Net Selection 6:25 Assigning Footprints 7:20 Creating a Custom Footprint 8:50 Laying out the PCB 10:28 Placing Traces 12:09 Design Rule Checking 12:35 Exporting Gerber and Ordering 13:20 Soldering the PCB 🌏🦘 *Core Electronics* is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for: • *Raspberry Pi* _https://core-electronics.com.au/raspberry-pi.html_ • *Arduino* _https://core-electronics.com.au/arduino.html_ • *Sparkfun* _https://core-electronics.com.au/brands/sparkfun-australia_ • *Adafruit* _https://core-electronics.com.au/brands/adafruit-australia_ • *Pololu* _https://core-electronics.com.au/brands/pololu-australia_ • *DFRobot* _https://core-electronics.com.au/brands/dfrobot-australia_ The following trademarks are owned by *Core Electronics Pty Ltd:* "Core Electronics" and the Core Electronics logo "Makerverse" and the Makerverse logo "PiicoDev" and the PiicoDev logo "GlowBit" and the GlowBit logo