Photo Vlog 8: Jobo CPP-3 Installation & Testing

This is a followup to my previous unboxing video, where I take the Jobo CPP-3 processor out to my darkroom and get it ready for use. The biggest catch I discovered in the process is that American users will need an adapter (link below) to securely connect a water hose without leaking. It would have been nice if this was clearly stated in the product information, or even included with the machine. (They did include a US electrical plug at least.) A few more updates, thanks to CatLabs: - The T-connector on the overflow is actually supposed to be connected at the bottom, with the top left open as a breather. Otherwise, the water level inside the Jobo may rise too high. (So ignore the kludge you see me doing at the start of the video.) - The transfer gears should be lubricated regularly, using the included grease. For more information on the Jobo CPP-3: http://www.jobo-usa.com/jobo-analog-products/jobo-cpp3-processor 3/4" BSPP (Female) to NPT (Male) adapters: https://www.mcmaster.com/4936k145 https://www.amazon.com/Thread-Metric-Female-Fitting-Adapter/dp/B01MUCPEL1/ https://www.zoro.com/westward-hose-to-pipe-adapter-malefemale-4kg84/i/G2397516/ Washing machine hoses: https://www.amazon.com/gp/product/B07FQ814VT/ Drain/overflow tube is clear vinyl tubing with a 3/4" inside diameter: https://www.acehardware.com/departments/plumbing/hoses-and-tubing/vinyl-tubing/4027538 (The store sells it by the foot. No idea what length the online price is for.) Rubber hose washers: https://www.acehardware.com/departments/lawn-and-garden/watering-and-irrigation/garden-hose-connectors/74129 (I stuck 3 of these inside the female end of the pipe adapter from McMaster-Carr, because it was rather deep and I wanted a snug fit.) Hose clamps: https://www.amazon.com/gp/product/B07HL4TZWG/ (Link included for reference as to what these are. Obviously anything similar should work fine.) -- Twitter: https://twitter.com/dkonigs Instagram: https://www.instagram.com/dkonigsberg/ SmugMug: https://dkfoto.smugmug.com/ Flickr: https://www.flickr.com/photos/40232692@N06/ -- Happy Haunts by Aaron Kenny (YouTube Music Library) CGI Snake by Chris Zabriskie is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://chriszabriskie.com/divider/ Artist: http://chriszabriskie.com/ Music provided by Argofox: Road Lizard - Beacon youtu.be/T67s12aKRqg