Plasticity Tutorial for Beginners - The EASIEST 3D CAD

10% off Plasticity with coupon code DAMIANCADCAM Go to https://www.plasticity.xyz/#pricing At checkout, click 'Add discount' and enter code DAMIANCADCAM Support the @CADCAMLessons channel: https://ko-fi.com/cadcamlessons Check out my second channel about Plasticity 3D CAD: https://www.youtube.com/@UCTzqpUnB0I8QQwdsTeQQcUQ I have prepared a Plasticity tutorial for beginners. A bit about me - I am a CAD/CAM engineer, mostly designing parts with regular shapes, and the tutorial is based on my experiences with this type of software. In the tutorial, I tried to cover the basics of creating solid models in 3D CAD systems. I think it could be a good resource for beginners in Plasticity, as well as for users of other 3D CAD systems (like Autodesk Fusion or FreeCAD). I have always been a fan of parametric 3D CAD systems, but since I started using Plasticity, I saw how quickly you can create 3D models and realized that in some cases, parameters and constraints can limit creativity and slow down 3D modeling. That's why I decided to expand my knowledge and start working with Plasticity. I want to make it easier for others, so I prepared this tutorial. I think many people may find this tutorial useful. 00:00 Introduction and information about Plasticity 01:13 Discount for Plasticity 01:32 Support me 01:38 More Plasticity Tutorials - My Second Channel 01:54 Introduction to Plasticity and a brief overview of the interface 03:50 Snap to grid 05:23 Basics of navigation in Plasticity 08:16 Simple 2D geometry in Plasticity 09:38 Geometry of specific dimensions 10:34 Change of geometry dimensions 11:01 Selection modes: Point, Edge, Face, Solid 14:35 Move the geometry 17:03 Mirror command based on a 2D sketch 19:15 Extrude command - Solid by extruding a flat sketch 21:32 Automatically invoke commands 23:05 Chamfer or Fillet of 2D geometry 24:15 Chamfer or Fillet of 3D Solid 25:35 Offset Face 27:30 Boolean: Union 28:24 Next Basics of Plasticity 30:13 Select the entire edge 30:45 Change radius value 31:33 Remove fillet 32:00 Change diameter (and other dimensions) 33:10 Object snaps 35:12 Boolean: Difference 37:34 Sweep Command in Plasticity 43:17 Pipe Command in Plasticity 46:25 Lift Command in Plasticity 48:54 Ispoparam Command in Plasticity 52:37 Hollow a Solid Command in Plasticity 55:14 Mirror of a Solid and different mirror planes 59:48 Rectangullar Array in Plasticity 01:03:35 Radial Array in Plasticity 01:05:40 Text in Plasticity 01:07:25 Solid Based on Text 01:08:59 Text on the model's face 01:11:57 Text in any font 01:17:45 Place Command in Plasticity 01:21:35 Move and Rotate in Plasticity 01:24:49 STL Export in Plasticity 01:29:00 STEP Export in Plasticity 01:31:54 Thank you!