Pool Table Assembly Instructions: How to Set Up a Pool Table

Assembling a pool table correctly comes down to one thing: getting the slate perfectly level. Here's the complete assembly walkthrough with the level adjustments that actually matter. 📋 Free Home Maintenance Checklist → https://the-struggle-bus.beehiiv.com A pool table that isn't level plays terribly — balls drift toward the low side on every shot. Leveling starts with the legs (adjust foot levelers), then the frame, and finally the slate itself using paper shims. A standard 8-foot pool table has 3-piece slate; each piece must be level individually and flush at the seams. The felt stretches over all three pieces simultaneously, so any unevenness shows in the finished surface. TOOLS USED: → IRWIN Level I-Beam 72-Inch: https://amzn.to/3qMOHym → DEWALT 20V MAX Cordless Impact Driver (DCF787C2): https://amzn.to/3GAb94M → Stanley FatMax Tape Measure 25 ft: https://amzn.to/3kgGJ02 The felt stretch is the step that trips up most DIYers. Work from the center outward, pulling firm and even tension on all sides before stapling. Staple the center first, then alternate sides — never start at a corner. PRO TIP: Use a small torpedo level and a quality 4-foot level together — the torpedo level for individual slate pieces, the long level for checking the full playing surface end-to-end and side-to-side. Subscribe for more DIY home repair tutorials: https://www.youtube.com/@Housebarons As an Amazon Associate I earn from qualifying purchases. This helps support the channel at no extra cost to you. #PoolTableAssembly #PoolTableSetup #BilliardsTable #DIYGameRoom #HouseBarons