POWDER COATING BOOTH UPGRADES

If you’re interested in building this project, check out the links below of the items I used in the build (not all items are exactly what I used, but are similar)(affiliate links do help support the channel!): Powder Coating Gun https://amzn.to/3waCkMw Air Regulator/Dryer https://amzn.to/3jEYcge LED Light Strip https://amzn.to/2UibhSa LED 90 Degree Connector https://amzn.to/3jHwNu4 Power Strip https://amzn.to/3xitRbx A while back I made a booth to do powder coating, here are some upgrades to the booth. The inside of the booth was a little dark, so I installed some LED light strips to give some light to what you are doing. I attached all the elements needed for powder coating to the side of the booth, this included the control unit, the powder coating gun, air hose, air regulator/dryer, and a power strip so all you need to do is plug in the strip. I then made a unit that holds the oven rack, this makes it easy to move items from the booth to the oven and it also spins, making it easier to cover all sides of the item being coated.