Powermax SYNC and Powermax 125 - Air Filter Replacement - Technical Tips

PMX65/85 SYNC Part Number: 428352 | PMX125 Part Number: 428351 This video explains the purpose of the procedure and demonstrates how to inspect and replace the air filter to support: - Cut quality - Consumable life - System reliability A. Preparation & safety - Power down the system - Disconnect the air supply - Allow pressure to bleed off before opening the filter housing B. Locating the air filter Identify the air filter assembly on the rear or side of the system Show differences (if any) between: - Powermax Sync design - PMX 125 design C. Removing the old filter - Open or unscrew the filter housing - Remove the used air filter element Check for: - Excess moisture - Oil contamination - Dirt or debris buildup D. Installing the new filter -Insert the new filter in the correct orientation - Make sure the filter is properly seated and sealed - Reinstall and secure the housing E. Final checks - Reconnect air supply - Power the system back on Verify: - No air leaks - Normal airflow - System ready for operation F. Maintenance guidance - Recommend routine inspection intervals - Replace filters sooner in dirty or humid environments Contact us on WhatsApp: https://wa.me/6591387345