Procool - Elitech ECS-180A Controller Settings

Iron Mountain Refrigeration and Equipment, LLC 10550 86th Ave Ste 101 Pleasant Prairie, WI 53158 phone: 833-734-8880 email: [email protected] www.ironmountainrefrigeration.com Elitech ECS 180 is used in Procool Refrigeration Upright Display Coolers and Back Bar Coolers sold by Iron Mountain Refrigeration & Equipment. This video demonstrates how to access the parameter menu and program the Elitech Digital Temperature Controller model ECS-180 Refulgence used in Iron Mountain Refrigeration & Equipment Procool commercial back bar coolers and display coolers. CS-360FB, CSD-1000, CSD-1000S, CST-1600 BB-A1, BB-A2, BB-A3, BB-A3S, SSBB-A3, SSBB-A2, SSBB-A1 Steps: 1. Hold “Set” for 5 seconds until the controller displays “St”. 2. Press “up” button and controller will display “Po”. 3. Press “Set” again and “00” is displayed. 4. Press “up” until you reach “55”. 5. Press set to return to “Po” and enter parameters. 6. Use “up” and “down” buttons to find the desired code. 7. Press “Set” and use “up” and “down” buttons to change. 8. Press “set” again to return to the menu. To change another parameter, use “up” and “down” buttons to find the desired code. 9. The controller will exit parameter settings automatically after 30 seconds without use. Parameter Codes C1 - Temperature differential = 6 C5 - Low Temperature = 35 C6 - High Temperature = 41 d4 - Defrost Interval = 6 hours d6 - Maximum Defrost Time = 25 min d8 - Drip Delay after Defrost = 2 min