Programming ATtiny10 with USBasp Programmer

This is a video about programming ATtiny10 AVR 8-bit microcontroller using an USBasp programmer ordered on AliExpress. The same way you can program ATtiny9, ATtiny5 and ATtiny4 which belong to the same family. In the video I show you how to connect the USBasp programmer to an ATtiny10 microcontroller and how to check the connection using avrdude utility. If you also want to use USBasp programmers for programming ATtiny10 you should upgrade them to the latest firmware which supports TPI programming interface necessary for programming these microcontrollers, see: https://youtu.be/1tU7cAFwzig. 🛠 Tools which I use in the video 🛠 ➟ ATtiny10 https://s.click.aliexpress.com/e/_ALZJKp ➟ SOT23/SOP10 to DIP10 Adapter https://s.click.aliexpress.com/e/_Alvpiv ➟ USBasp Programmer https://s.click.aliexpress.com/e/_977rmx ➟ 10-Pin to 6-Pin Adapter https://s.click.aliexpress.com/e/_AsFVSj ➟ 10-Pin Ribbon Cable https://s.click.aliexpress.com/e/_A5ZboP ➟ Small Breadboards https://s.click.aliexpress.com/e/_AN0LsH ➟ Dupont Wires https://s.click.aliexpress.com/e/_9zcKan Stay creative and keep on tinkering 😊