If your ProTee VX was working fine and suddenly isn’t, this video walks through the most common causes.
This isn’t about calibration or mounting. It’s about the typical communication issues between ProTee VX, ProTee Labs, and GSPro that can occasionally fall out of sync.
In this guide we cover:
• How and when to properly power cycle the ProTee VX
• Checking that ProTee Labs is connected to GSPro
• Making sure the GSPro connection window hasn’t been closed
• Confirming everything is green, sequenced correctly, and communicating properly
Most “sudden” issues are simply one small step being out of order rather than a hardware fault.
Run through this checklist before assuming something is broken.
If your system was installed by Golf Sim Rooms and the issue persists after these checks, send us a short video of what you’re seeing and we’ll take it from there.
⸻
ProTee VX troubleshooting
ProTee VX not reading
GSPro not connecting
ProTee Labs connection issue
Golf simulator no reads
Ceiling mounted launch monitor fix
