QuickLOAD Tutorial V-3.9.0.14

Here I give an example on how to set-up and use QuickLOAD for load developing. This is version 3.9.0.14 (18/07/2022) EDIT: It has been brought to my attention that I did make an error. If you use the maximum pressures and minus 'X' from that number, (eg: 64,000psi - 2500 = 61,500psi. Or 55,000psi - 1800 = 53,200psi) that final number needed to be inputted in the 'Pmax (MAP) psi' area. I left the psi at 64,000 which is incorrect! The number should have been 61,500psi, not 64,000psi! The 'Pmax (MAP) psi' section determines the Charge Variations and you will get a different result if you do not change the number to the "safe" psi. Of course you can use the max psi if you like, that is up to you. I do mention it briefly @ 32min 26sec. Also, when you find your 'Grains H20' and you change the value, that number will revert back to default if you change cartridge type. I do sincerely apologies for any confusion or inconvenience caused. I will do better next time.