Radiomaster Pocket - Toggle Switch Mod

#RadioMaster Pocket - Toggle Switch Mod The biggest achiles heel I found with the Pocket was the SA/SD Button switches which I could never get use to. It was hard to tell if I had air mode on, and landing was always bumpy when trying to disarm. Finally switched them out with Zorro 2pos toggle switches (SE+SF switches) I suggest checking out the chaptered bits because even though I say in the beginning, working with the Pocket is easy, it turned out to be a real pain and challenge reassembling it...lol. That's what I get for recording a "One-Take" video! Jump to 7:20 on instructions on how to doing the mod itself. Any questions please reach out and happy viewing! 0:00 Intro/Why do it? 1:05 what's needed 2:00 Disassembly 3:02 How toggle switches look assembled / type of switches to get 4:15 Unscrewing and unplugging items to remove board 5:05 cautions in regards to the buttons 5:53 Removal of the board 6:56 Spent some time figuring out what the orientation was of original button switches 7:20 *Showing the orientation of original SA/SD button switches and how to remove* 9:53 *where to solder wires of the new switches* 10:30 reassembly (watch as I suffer trying to put it together...) 11:04 Disclaimer (careful how you desolder old switch off) 12:30 ProTip on reassembly - Jog wheel 13:24 Eureka! Board is in! 13:53 ProTip - Attaching the Ribbon 14:53 ProTip - Use magnet to aide in put screws back on 16:42 Make sure no wires are kinked or pinched 17:55 Ways to keeps the toggle switches in place 18:25 Plug power and test! 20:20 Conclusion STL file for SA/SD Covers: https://www.printables.com/model/1086423-radiomaster-pocket-sasd-switch-cover You'll want the SE+SF switches off a Zorro: https://www.radiomasterrc.com/collections/zorro-accessories/products/switch-2-position-and-switch-3-position-for-zorro?variant=43467211112679