Raspberry Pi Zero, headless wifi setup - Part 1

In this tutorial I take you through setting up a Raspberry Pi Zero headless using a Ryanteck Debug clip without a monitor, keyboard or mouse. I setup a wifi dongle and then gain access to the Pi via SSH I talk you though the settings in the /etc/network/interfaces file to get the Pi onto your local wifi network Contents of my /etc/network/interfaces file is as follows: # interfaces(5) file used by ifup(8) and ifdown(8) # Please note that this file is written to be used with dhcpcd For # static IP, consult /etc/dhcpcd.conf and 'man dhcpcd.conf' # Include files from /etc/network/interfaces.d: source-directory /etc/network/interfaces.d auto lo iface lo inet loopback iface eth0 inet manual allow-hotplug wlan0 auto wlan0 iface wlan0 inet dhcp # wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf wpa-ssid your-ssid wpa-psk your-wifi-password allow-hotplug wlan1 iface wlan1 inet manual wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf #----- end of file Ryanteck debug clip can be purchased from here: https://ryanteck.uk/raspberry-pi/59-raspberry-pi-debug-clip-0635648607184.html