Ratcheting the Behringer 960 Sequential Controller (Sequencer) using just a 962 Sequential Switch and 921 Oscillator.
Accurate ratcheting is easily accomplished using a voltage controlled clock multiplier (or divider), but this approach uses only Behringer System 55 reporductions of "Moog Modular" modules - no "non-Moog" clock dividers or similar were used.
A 961 Interface module is used for V-TRIG to S-TRIG conversion.
The 960 output is shown incorrectly connected to the 2HP Tune (quantizer) "bias" input (it should be connected to "in"!).
The audio chain comprises:
901A Oscillator Controller
2 x 901B Oscillator
CP3 Mixer
904A Low Pass Filter
902 VCA
2 x 911 Envelope Generator
