REPLACE HANDWHEEL BOBBIN WINDER SINGER 338

REPLACE HANDWHEEL BOBBIN WINDER SINGER 338 00:00 THIS IS A GREAT VIEW OF THIS END OF THE SEWING MACHINE. 01:20 I WANT TO REPLACE THE HANDWHEEL & BOBBIN WINDER. 01:40 CLEAN MOTOR SPINDLE. 02:20 THERE IS A GROOVE GROUND INTO THE AXLE. THAT IS WHERE THE SET SCREW FROM THE PULLEY TIGHTENS. 03:10 CLEAN ING WORK AREA WITH OIL. 05:00 WASHING THE HANDWHEEL. 07:00 THE PARTS ARE WASHED & DRIED. 08:00 THE FLANGE BUSHING ASSISTS IN ENGAGING & DISENGAGING THE POWER TO THE HORIZONTAL ARM SHAFT & NEEDLE BAR. 09:00 STARTING HANDWHEEL REPLACEMENT. 09:40 THE HANDWHEEL BELT IS ON. 09:55 THE NEXT THING TO GO ON IS THE WASHER. THE STOP MOTION CLAMP WASHER. 10:10 THE STOP MOTION CLAMP WASHER HAS 2 ANGLED TABS. THOSE TABS FACE INWARD TOWARDS THE FLANGED BUSHING. 11:00 THE SET SCREW HAS TO SEAT IN THE DEPRESSION IN THE MOTOR SHAFT. 11:30 THE SET SCREW IS TIGHTENED IN THE CORRECT POSITION. 12:15 REPLACE STOP MOTION CLAMP WASHER. 13:00 THE TEST IS GOOD/PERFECT. ENGAGEMENT & DISENGAGEMENT PERFORM AS EXPECTED. 14:20 I PUT THE END COVER ON TOO EARLY SO IT HAS TO COME OFF TWICW; ONCE FOR THE BOBBIN WINDER AND THEN AGAIN FOR THE BOBBIN WINDER WHEEL. 15:00 START THE ASSEMBLY AGAIN. 15:30 BOBBIN WINDER IS INSTALLED CORRECTLY. 16:00 REPLACING THE MOTOR PULLEY. 16:40 THE BOBBIN WINDER TIRE HAS TO GO ON STILL. LOL! 16:55 BOBBIN WINDER TIRE IS ON! 17:45 RE-TEST AFTER ADJUSTMENTS. 18:00 WORKING AS INTENDED. 19:00 THIS WAS A GREAT LEARNING EXPERIENCE. 19:15 THANK YOU.