Revit Tutorial - Weld Neck Flange

Part 1.6 - Piping Modeling - Revit Tutorial - Flange-Weld neck https://www.pipeex.org/ https://drive.google.com/file/d/19UY4cZocyruON92ABG0eaorfDY6bQfcX/view?usp=sharing 0:00 Introduction 0:22 Use an elbow family as the base 0:33 Clean up unnecessary reference planes and dimensions 0:50 Set up new reference planes for the flange 1:00 Add flange dimensions and labels 1:46 Define flange geometry and diameter relationships 2:25 Build the flange revolve and connect dimensions 2:33 Prepare and import the lookup table 2:57 Add and link nominal pressure as a shared parameter 3:15 Set default facing thickness and adjust inside diameter formula 3:33 Test the family with a sample size 3:40 Finalize the flange geometry 3:57 Add connectors and align them to the centerline 4:07 Why bolt holes are not modeled 4:22 Set system classification and primary connector 4:33 Add text properties for name, standard, and material 4:49 Final result 5:03 Load the flange into a project and connect it to pipes 5:11 Outro #Engineering #PipingEngineering #MechanicalDesign #ProcessEngineering #AutodeskPlant3D#RevitTutorial#SoftwareTutorial#IndustrialEngineering#TechnicalSkills #DIYEngineering #TutorialVideo#InnovativeEngineering #ProductivityTips #ProfessionalDevelopment #TechSavvy #EngineeringLife #CADDesign #DigitalEngineering #SkillBuilding #LearningResources