[ROS Q&A] 008 - How to Start Programming Drones using ROS

* Get all the ROS code of the video in this link: http://www.rosject.io/l/c37858c/ Full code & post of the video: http://www.theconstructsim.com/start-programming-drones-using-ros-video-answer/ This video will show you how to start programming drones using ROS (Robot Operating System). We'll walk through the basics of a Parrot AR Drone Gazebo simulation. You will learn the topics provided by the simulation and how to use a ROS program to interact, sending commands or reading sensors, with this robot. [Links and resources mentioned in the video] - ROS Development Studio: http://www.theconstructsim.com/rds-ros-development-studio/?next=https%3A%2F%2Frds.theconstructsim.com%2F& - The course of Programming Drones with ROS is available here: http://www.theconstructsim.com/construct-learn-develop-robots-using-ros/robotigniteacademy_learnros/ros-courses-library/ros-courses-programming-drones-ros/ [About the course] Learn all the basics you need in order to start programming autonomous drones. - You are going to learn all the basics you need in order to start programming autonomous drones. - You are going to use a Parrot AR Drone. You will learn: - Basic Control of a drone - Drone exploration - Drone Navigation - Simulation In The Loop Robots Used in this course: - Parrot AR Drone - Hector Quadrotor