00:00 Prepare the network
12:35 Configure Router 0
Router enable
Router#configure terminal
Router(config)#hostname R0
R0(config)#interface fa0/0
R0(config-if)#ip address 192.168.0.1 255.255.255.0
R0(config-if)#no shutdown
R0(config-if)#interface serial 0/1/0
R0(config-if)#ip address 192.168.3.1 255.255.255.0
R0(config-if)#clock rate 64000 , if it is DCE
R0(config-if)#no shutdown
R0# show ip interface brief
18:10 Configure Router 1
25:10 Configure PC0
26:55 Configure PC1
27:40 Test 1
29:27 Configure RIP R0
R0(config)# router rip
R0(config)# network 192.168.0.0
R0(config)# network 192.168.3.0
31:34 Configure RIP R1
R0# show ip route
33:50 Test 2
34:35 Table Configuration
#CiscoPacketTracer #RIPConfiguration #RIP
#NetworkingLab
#DynamicRouting
#CiscoRouting #networkingtutorial
#CybNetTutorials #cyberlab
#RoutingProtocols #NetworkConfiguration
#CiscoLab
