Run8 Quick Tutorial 1 - Get a Train Moving

Very quick and dirty tutorial on starting up a train and getting it moving in Run8 Version 2. Nothing in detail and I don't go over any real rail operations. ERRATA: 1. I mentioned closing the rear anglecock -you want it open if you have an installed EoT device (installing the EoT will open it if you closed it). You want it closed if you do NOT have an EoT device. 2. I called the signal an 'Approach Signal'. That one was actually an Approach Medium. The red stop signal would follow an approach signal after the approach medium. BNSF Signal Reference: http://utu199.progressthroughunity.org/documents/Signals Run8 Depot: https://www.thedepotserver.com/ Run8: http://www.run8studios.com/