Session 2 Lap winding Using Nanocad session

The Procedure to be followed to develop Single Layer Simplex Lap winding Diagram using Nanocad Plus 11 software is discussed. In this example, No. of Slots=Nl=16, Coil side=m=1, simplex=X=1, No. of Poles=4 Therefore, Z=Nlxm=16x1=16 Pole Pitch=Yp=Z/P=16/4=4 WKT, Yb + Yf = 2Yp = 2x4 = 8 Yb - Yf = 2Yc = 2 x 1 = 2 By solving the above equations, Yb= 5 abd Yf=3