In this video, the Solved problems on shift registers (Digital Electronics) have been discussed.
Here is the detail of the Quiz.
Subject: Digital Electronics
Topic: Shift Registers
Question 1:
The initial content of the 4 bit serial IN parallel OUT shift right register shown below are 0110. What will be the content of the register after 3 clock pulses ?
A) 0000
B) 0101
C) 1010
D) 1111
Question 2:
The shift register shown below is initially loaded with 1010. If clock is applied continuously then after how may clock pulses the content of the shift register becomes 1010 again.
A) 3
B) 7
C) 11
D) 15
Question 3:
Assume all the gates in the given digital circuits are ideal. The resistor R is 10 kΩ and supply voltage is 5V. The D Flip-flops D4, D3, D2, D1 and D0 are initialized with the logic values 0, 1, 0, 1 and 0 respectively. The clock cycle has 30 % duty cycle.
The average power dissipated in the resistor R is ________
Digital Electronics Solved Problems:
https://bit.ly/3QuE6T8
0:00 Quiz 423
2:53 Quiz 424
8:24 Quiz 425
#ALLABOUTELECTRONICSQuiz
#digitalelectronics
#sequentialcircuits
#shiftregister
The Quiz will be helpful to all the students of science and engineering for preparing for university or competitive exams (GATE, IES, etc.)
Follow me on YouTube:
https://www.youtube.com/allaboutelect...
Follow me on Facebook:
https://www.facebook.com/ALLABOUTELEC...
Follow me on Instagram:
https://www.instagram.com/all_about.e...
Music Credit:
http://www.bensound.com/
