Siemens NX tutorial | Swept, create an elbow

FF-1-P | Siemens NX Tutorial Freeform | This exercise shows the typical work steps for creating a pipe elbow with the Swept command and modelling the flanges. It is the practical exercise for the FF-1 learning video, so it does not teach you any new content, but gives you the opportunity to practice again and check your knowledge. You know, practice makes perfect. ▬about this channel▬▬▬▬▬▬▬ With LearnNX you will learn Siemens NX step-by-step from the beginning. The basic course consists of learning videos that build on each other. (marked blue) In between you can check your knowledge with tests. (marked green) Expert exercises impart special knowledge. (marked red) We look forward to your comments on YouTube. (and about your subscription ;-) https://www.youtube.com/channel/UC1CNU9Ud4BhtkobhSVwL85g?sub_confirmation=1 ▬about our learning platform▬▬ 😃 All tutorials, clearly arranged, can be found here: https://learnnx.com Learning videos with a short description, together with the exercise materials as download. You can also search 🔎 for commands or topics. And all according to the motto: step by step / for free / for all 🎈 ▬Links▬▬▬▬▬▬▬▬▬▬▬▬▬ https://learnnx.com/ff-1-p/ ▬chapter▬▬▬▬▬▬▬▬▬▬▬▬ 00:00:00 Foreword 00:00:34 Sketches 00:02:28 Sweeping the section 00:03:17 Create wall thickness 00:03:36 Create the flanges 00:05:17 Threaded holes 00:06:51 Chamfers and edge blends ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ ► visit us on https://learnnx.com #learnNX #freeform #swept