SIYI MK15 Android Upgrade

Here is a short video on how to do the Android operating system upgrade on the SIYI MK15. The upgrade is easy enough Updated 1/10/2022 Here is the URL for the firmware.https://drive.google.com/drive/folders/1KJ2ftX6rwyGRurII-AunyOIZS3wwuNPd?fbclid=IwAR12Det9LT5xlGnM9ZFL8JOvfvGqb8VouPYkLnzu3tlw6kYL0vqOI2fhA-Y How to Flash MK15 Android System Preparation Files to be downloaded in your PC. QPST.2.7.483.exe Extracted from “qpst.win.2.7_installer_00483.3”. QFIL Setup.exe Extracted from “qud.win.1.1_installer_10052.9”. ③ MK15_Android_Firmware_v1.2HW2.0b *Better we place all files in the same folder. Software QFIL.exe Tools 1 x Cable (USB-A to Type) Steps Use the cable to connect MK15 transmitter’s Type-C port with the USB-A port on your PC. Open the software “QFIL.exe” on your PC. Press both button A and B and do not release. And power on MK15 transmitter to enter “Upgrade Mode”. In “QFIL” software, it will detect the transmitter port. In the software page, check “Flat Build”. After “Programmer Path”, browse “prog_emmc_firehose_8953_ddr.mbn” and open. Click “Load XML”, browse “rawprogram_unsparse.xml” and “patch0.xml”, then open. After open all files, click “Download”. The progress bar starts to move. Upgrading started. When the progress bar reaches 100%, and it displays “Download Succeed”, Android system upgrading is finished. Then we remove the cable and hold the transmitter power button for about 10 seconds till the transmitter is forced to be shut down.