SliderPLUS v6 - Quick Guide

SliderPLUS v6 – Quick Guide to Setup and Operation Overview The SliderPLUS v6 is a versatile motion control slider designed for smooth camera movements and advanced shooting techniques. This guide walks you through the essential steps for mounting, powering, controlling, and safely operating your SliderPLUS v6. ⸻ 1. Mounting Your SliderPLUS v6 • Tripod Setup: Before attaching the SliderPLUS to your tripod, remove the tripod head. Connect the slider directly to the 3/8-inch screw on the tripod bowl. • Securing the Slider: Rotate the connection ring to lock the slider in place. Ensure your tripod legs are extended wide enough to support the slider’s full travel range. ⸻ 2. Powering the Device • Battery Option: The SliderPLUS comes with an NPF battery bracket. Attach it to the top or bottom of the motor unit, then connect its cable to the slider. • AC/DC Adapter or Power Module: You can also power the unit using an AC/DC adapter or the Power Module. • Power-On Behavior: As soon as power is connected, the slider turns on automatically. You can also turn it on/off manually by holding the power button. ⸻ 3. Manual and Onboard Controls • Manual Positioning: You can slide the camera carriage by hand for positioning before a shot (not during recording). • Onboard Button Control: • Movement: Use the left/right arrow buttons to slide. Movement continues as long as you hold the button. • Speed: Adjust speed using the up/down buttons. • Acceleration: Press the center button to enter acceleration settings. Select between 1 (smooth) and 10 (abrupt). Press center again to return to speed control. ⸻ 4. Incline and Vertical Operation • Without Vertical Module: Operate horizontally or at a maximum incline of 30°. Use a tilt head to keep the camera level. • With Vertical Module: Safely use the slider at any incline for more creative shots. • Motor Lock Mode: At inclines, the motor locks automatically to prevent unintended movement. Hold the center button to temporarily deactivate the motor, position the slider, then release to reactivate. ⸻ 5. Advanced Features with the Edelkrone App For advanced movements, time-lapses, and multi-device pairing: • Download the Edelkrone App on your iOS or Android device. • Connect to your SliderPLUS when powered on. • Explore advanced shooting modes and settings in the app. • For visual guides, refer to the Edelkrone Academy videos. ⸻ Safety & Best Practices • Always ensure tripod stability before use. • Avoid exceeding recommended incline angles without the Vertical Module. • Do not operate manually during filming to avoid jerky footage. ⸻ Keywords SliderPLUS v6, Edelkrone slider guide, camera slider setup, motion control slider, SliderPLUS tips, tripod mounting slider, NPF battery slider, vertical module slider, Edelkrone app slider, SliderPLUS incline use