Solid Edge 2024 Tutorial - Moderate Beginners # 3

This is the third video in the Moderate Beginners videos for learning Solid Edge using the 2024 version. The video covers essential tools such as developing the part, extrusions, and standard drawing tools. Moreover, the video explains how to develop the draft sheet, perform the section, and modify the draft sheet template. If you are new to Solid Edge, I recommend watching the introduction videos: Introduction to Solid Edge - Part A, B & C - ( https://youtu.be/-9lGABw0D_8 ), ( https://youtu.be/pDhTCiO-AMk ), & (https://youtu.be/VW6ZFrPi7sY ). Then watch the Absolute Beginners videos. If you are interested in getting a copy of the PDF dimensions of this video, please use the following link: https://drive.google.com/drive/folders/1gNck1W2mBL3Kk2RW7ii0TbfWnTbZGzJI Note: This video is recommended for early and beginning levels using Solid Edge 2024. To download a free copy of Solid Edge, please use the following links: 1. For Students or Teachers – Academic version: https://solidedge.siemens.com/en/industries/academic/ 2. For Personal use ONLY – Community version: https://resources.sw.siemens.com/en-US/download-solid-edge-community-edition/ Timecodes 00:00 – Introduction. 02:10 – Start solid edge - Using circle by center command to start the top projection sketch. 03:40 – Locking the circles and drawing the tangent curves. 08:07 – drawing the tangent curves between the circle groups. 09:35 – Extrusion using the Select Command. 12:10 – Finishing the part and saving it 15:00 – How to choose the materials 16:22 — Choosing the draft sheet size 17:20 – Drawing the projection planes 18:50 – Drawing the section plane (cutting plane – section) 21:05 – laying the dimensions 24:30 – Saving the draft sheet 25:00 – Concluded remarks