Start Point:
This parameter indicates the initial position and final position of the cutting tool for each toolpath in the X, Y and Z axes.
Activating the Absolute Z option will force the input data to be an absolute value. If not enabled, the value will be relative with respect to the highest point of the part.
Activating the Output Z only option and defining a value in the Z input field adds an offset in the Z axis with respect to each entry point.
NOTE: If the Start Point option is not selected then X=Y=Z=0 (default value). WORKNC will use the existing start and end points in the toolpath. See example in the following Section on Concatenated Postprocessing.
The use of 3D design and forming programs in the engineering industry
