StealthMax

Features: 1) The interior is filled with 4mm columnar activated carbon, which can effectively absorb harmful gases such as volatile organic compounds (VOC); 2) It is also equipped with a HEPA (High Efficiency Particulate Air) filter, which can effectively capture tiny particles with a diameter of 2.5 microns and below (usually much smaller in 3D printing) and filter out tiny particles generated during the printing process; 3) The use of Raspberry Pi Pico W Wifi wireless module makes installation and operation simpler and more convenient; 4) Add a 12V step-down module. The device can be directly powered by 24V without a separate 12V power supply; 5) Each module has been soldered with pin headers and circuits, and can be plugged in and used directly without re-soldering.