Stepper Motor controller with IR Remote MPJA.com 34116 MS

Step Motor driver/controller with IR remote control, for 2 phase, 4 wire NEMA 14, 17 and small Can Stack motors. Can be used to control higher power Drivers. NOTE: Does NOT Retain Settings when Power Removed Default: Speed Level "5" Motor "OFF" Power: 5VDC ~300mA IR Remote and/or Onboard switches control Speed & Direction 9 Level speed control. LED Display for speed level. Forward & Reverse Buttons Press once, Motor Runs Press Again Motor Stops. Recommend a 3-5V 4 wire Stepper Will drive higher power motors depending on torque Load. 7in Pigtail Leads