Removing the platter so we can turn the unit upside down to remove the bottom cover and access the spindle and PCB. Also a look at the old Matsushita capacitors and why you probably, really, truly want to replace them - this was the first time I've ever opened this unit up, and probably the first time ever in its life anyone has had a tinker, but I already knew they were bad.
Next part will be the replacement of the capacitors, refitting the PCB and preparing for getting access to the sled mechanism in the lid.
Caps:
47uF/16V BiPolar X 2 (These may be 100uF - please check what is installed)
100uF/16V
33uF/16V
4.7uF/25V
3.3uF/50V
47uF/10V
100uF/6.3V
1000uF/35V AXIAL
10uF/16V
