1. First, take the 500mm sample segment and cut it axially.
2. Take out the inner cable core and leave the sheath to divide it into 5 100MM segments.
3. Cut the sample into 5 dumbbell specimens with dumbbell harness.
4. Install the specimen on the equipment fixture, and then mark the distance with a large deformation device.
5. Choose the correct test program.
6. Input test parameters.
7. Zero the force value and deformation data.
8. Click the start button until the sample is broken.
9. After the test of 5 specimens is completed, check the test results and derive the test report.
