The Mulbot - 3D Printed Printer

The Mulbot 3D Printed Printer!! I am excited to introduce to you the Mulbot! This is a 3D printed printer that I designed and built to bring to MRRF next year. Not only does it use 3D printed recirculating ball bearings but it is driven by a 3D printed rack and pinion, 3D printed pulleys and a belt, and 3D printed nuts and trapezoidal screws. This is just a short introductory clip because I was so excited to show everyone the project. You can try subscribing or following me on thingiverse for notifications. https://www.thingiverse.com/3DPRINTINGWORLD/about The Mulbot is finally released! You can find stl's, instructions, and the BOM here: https://www.thingiverse.com/thing:3432384 Join our Facebook group: https://www.facebook.com/groups/275718849985834 ***Sponsors*** Please help to support the sponsors for this project. When I reached out to them and told them that I was building this printer to bring to MRRF they all offered to help with no questions asked by providing the necessary components. I put some affiliate links below. Filament: Solutech Real Red 1.75mm PLA: https://amzn.to/2DqQd2m Soultech Real Blue 1.75mm PLA: https://amzn.to/2OreAxD Soultech Real White 1.75mm PLA: https://amzn.to/2SPxTEl Sainsmart White for Timing Belt 1.75mm TPU: https://amzn.to/2QwaF4o Sainsmart Red for feet 1.75mm TPU: https://amzn.to/2PGZWHo Components: Cabricorn Bowden Tubing https://www.captubes.com/ E3D v6 Hotend provided by Filastruder: https://www.filastruder.com Seemecnc EZR Extruder provided by Matterhackers: https://www.matterhackers.com/store/l/seemecnc-ezrstruder-kit/sk/MWHJ83XV?aff=7457 Ramps 1.4 Printer Kit provided by Sainsmart: http://shrsl.com/1be01