Thrustmaster TMX Handbrake MOD

finally after some time i was able to get my hands on a thrustmast TMX to do my handbrake mod tutorial video. this covers how to dissemble and wire the wheel to be able to use a handbrake. *WARNING* this will void the warranty on any of the thrustmaster products, I DO NOT take any responsibility for anything that can happen to your thrustmaster products, This is at your own risk! Tools/supplies needed for this complete series: -Philips screwdriver -Soldering pen -Flux core solder -Flux -Wire strippers/crimpers -Small pliers -2.5 metric Allen wrench -4 to 6 wire connectors -1/4" Heat shrink tube, at least 5ft or Electrical tape -2 pin LED jump plug connector or a 2 pin connector of your choice -Heat gun/hair dryer, or some other sorce or heat to shrink the heat shrink tubing, if not using shrink tubing don't worry about it. -10ft of awg 22 or 24 speaker wire i used 22. -Small momentary button -Cheap hydraulic hand brake -The rest will be gone over in the videos. HANDBRAKE- http://amzn.to/2tmhy0e SHRINK TUBING- http://amzn.to/2tm3HXV MOMENTARY BUTTON- http://amzn.to/2tVfd9E CONNECTOR- http://amzn.to/2tmcwB8 SOLDERING KIT- http://amzn.to/2tVdIbA WIRE STRIPPERS/CRIPMS- http://amzn.to/2sjYcUT WIRING SERVICES- If you would like me to do this for you, contact me at the e-mail below and we can go over the details. CONTACT E-MAIL- [email protected]