TI IoT Week, Sensor Node Project Part 3

Adding the Texas Instruments SHARP96 LCD Boosterpack. Celebrating TI IoT week, I am building an IoT node that will monitor the Temperature and Light Levels of wherever you place it. TI products will be as much as possible the heart being a TI Launchpad CC3200. Temperature sensing has been added and today we add the LCD display, by the end of the week we will have a fully working IoT node that will post the data upto an MQTT server (The Cloud) and provide you with the means to subscribe to that data and present it in a useful way on a Smart device via an HTML5 browser. In this video we will add a 430boost-sharp96 display so that we can see the readings locally bit still keep the power consumption real low. If you want to replicate this project, it should not cost you more than 50-80$ depending on your current parts and options you choose. The launchpad selected for this project is the CC3200. http://www.ti.com/ww/en/launchpad/launchpads-connected-cc3200-launchxl.html#tabs TI Temperature sensor selected for the project is the TMP275 TMP275 http://www.ti.com/lit/ds/symlink/tmp275.pdf The Display is the 430BOOST-SHARP96 http://www.ti.com/lit/ug/slau553/slau553.pdf and purchased from here http://www.ti.com/tool/430boost-sharp96 or other vendors of your choice I would like to thank Texas Instruments for their support and sponsorship with this project Other videos for this series can be found here:- Day 1 https://youtu.be/im-ip8ZAXjY Day 2 https://youtu.be/QfE8kPg5cWk Day 3 https://youtu.be/feak2L_gM_w Day 4 https://youtu.be/AwO9qjMBsiE Day 5 https://youtu.be/5RdPFRs1cAc Day 6 https://youtu.be/f48pHgzB6VE Day 7 https://youtu.be/fpYWajndIOQ