Tig torch conversion

This is a somewhat crude torch conversion. The standard Parweld torch is quite large & I had another smaller unit laying around. However, this torch has the power run up what I suspect is a metal braided hose, so… a) the hose (power fitting) thread was metric & the Parweld BSP. b) If a made a direct adaptor, I was worried about back feeding the welder up the gas fitting. So the solution was to make a power fed pipe junction that was insulated from the welder. what I came up with was/is a little crude, but it is what I had kicking around. What lets it down is simply the electrical insulation and its size. Functionality wise it is spot on. Eventually I will revisit this, and make a smaller one. In the meantime Thanks for your time. Please subscribe ring that bell thing & join us on FB too ©War Grade #WarGrade #TigWelding #TIGTorch https://www.facebook.com/WarGrade/ https://www.youtube.com/wargrade Please do not reuse, repurpose, or re-edit our work for your own personal gratification! or commercial gain. If you would like to inquire about using footage (we don't bite too hard!!) please get in touch.