Tool Overview

The following tools are needed for J Geiger Shading System installation: Self leveling laser 25ft tape measure Drill Impact Driver Pilot hole bits (1/16th-1/2" recommended) Hammer Ten in one screwdriver Chisel (3/8" recommended) Keyhole saw Mill bastard file Torpedo level Bent/curved scissors Tweaker 3/32" allen keys Tick tracer Toner Marker and pencil Tape for marking wire locations and bracket placement Electrical tape (white recommended) Stud finder Speed square (plastic recommended) Combination square Wire strippers (up to 24 recommended) Crimper cutters Razor knife Zip ties J Geiger Install Template (these will be provided by J Geiger) Hardware Install Kits, which contain pertinent screws, sleeves, and drill bits, are available for order. See Install Kit Overview video for for details.