(tr)uSDX - easy FIX for splattering SSB Modulation

IMPORTANT NOTES: "Factory Reset" Rig after re-installing Firmware by pressing rotary encoder while powering up !!!! (Display shows "Reset settings" if successful) Another note worth mentioning: Most rigs have now 328PB Chip: Install Bootloader and burn fuses adressing the AtMega as 328PB. Once Bootloader is installed, and you see your serial Number: For Firmware installation via USB: Adress the AtMega as 328P !!!! Fix was easier than thought... Let me know if it works for you.