Turning between centers using TBC bushing adapters

In this tutorial, Chantelle shows how a pen is turned using between centers bushing adapters. Watch the process from start to finish, including tooling setup, turning, sanding, finishing and kit assembly. Video contents: 0:00 Intro 0:52 Out of round issues 1:26 TBC lathe setup 2:16 Turning the blank 3:42 Sanding the blank 5:53 Finishing the blank 7:38 Assembling Maple Leaf twist pen Products used: Between centers bushing adapters: https://www.penblanks.ca/between-centers-bushing-adapters-set-two/ 60-degree dead center (MT2): https://www.penblanks.ca/rotur-solid-dead-centre-mt2/ 60-degree live center (MT2): https://www.penblanks.ca/rotur-heavy-duty-rotating-centre-mt2/ Redheart pen blank: https://www.penblanks.ca/Redheart-Charkte-Kok-pen-blanks/ Maple leaf twist pen kit chrome/gun metal: https://www.penblanks.ca/Maple-Leaf-twist-pen-kit-chrome-gun-metal/ Maple leaf twist bushings 104A: https://www.penblanks.ca/Bushing-104A-Maple-Leaf-pen-kit/ Chisel with round carbide cutter: https://www.penblanks.ca/pen-master-accu-cut-chisel-round-finisher/ Sandpaper rolls: https://www.penblanks.ca/Abrasive-rolls-5-pack/ EEE-Ultra shine polish: https://www.penblanks.ca/EEE-Ultra-Shine-polish/ Doctor's Woodshop Pens Plus finish: https://www.penblanks.ca/doctor-s-woodshop-pens-plus/ Pen assembly press: https://www.penblanks.ca/pen-assembly-disassembly-press/